Knowledgebase
Lloytron Consumer Help Desk > Lloytron Consumer Help Desk > Knowledgebase

Search help:


» Category: Door Chimes  (Go back)

» Articles in this category:

 
Where can I buy additional Doorbell kits, Chime Receivers, Bell Pushes or Sensors? Article not rated yet
If your current doorbell is part of the MIP System range then you can buy from us at www.doorbellsolutions.com   
GUIDE - How to have a different tune for a different Bell Push , Sensor or Transmitter Article rated 5.0/5.0
See attached guide.   The MIP System generation 3 transmitter is required, also known as MIP3, to have a different tune being activated. This is backward compatible with 2nd generation receivers.   Th...
GUIDE - How do i link new devices to the MIP System? Article rated 4.6/5.0
See Guide attached
GUIDE - How do i know which generation of MIP System do i have? Article rated 4.0/5.0
see attached guide   HOW DO I KNOW WHAT GENERATION I HAVE? On the rear or side of every Receiver is a Rating Plate as shown. Th
GUIDE - How do i do a Factory Reset on MIP System products? Article rated 2.6/5.0
See guide attached.   FACTORY RESET This process will reset to factory default and clear any linked Bell Pushes/Transmitters to the Chime Unit. It should only be used when you wish to restart the link...
GUIDE - How do i setup and install a bell push transmitter? Article rated 3.6/5.0
See Guide attached
GUIDE - The wireless distance is poor, yet you claim over 150m+ range? Article rated 5.0/5.0
See guide attached
GUIDE - How do i setup and install a new receiver to my MIP System? Article rated 5.0/5.0
See guide attached
I have an old bell push that is no longer wired, or i want a new metal wired bell push for my door. Can i connect to a wireless system? Article not rated yet
Yes, using the new "Wired to Wireless" module, our model B7837WH, you can easily connect this module into your current wired system with simple DIY skills. This module will then generate a wireless si...
I have a wired Door Bell system but i can't expand and add more receivers. Can i create a wireless system? Article rated 5.0/5.0
Yes, using the new "Wired to Wireless" module, our model B7837WH, you can easily connect this module into your current wired system with simple DIY skills. This module will then generate a wireless si...
Can I add another receiver or bell push to the Door Chime? Article rated 2.7/5.0
New MiP System Technology from Lloytron will allow the programming of additional Bell Pushes, Door Chimes and even other devices such as motion sensors, magnetic door sensors and many more. This new ...
Random Activation with MIP Door Chimes Article rated 2.8/5.0
It is very rare for any Door Chime to randomly activate. Usually this is because water has penetrated the outdoor bell push, or the bell push has been physically broken due to too much pressure exerte...
The Door Chime does not operate far away. Article rated 2.5/5.0
The range of the MiP Door Chime system is 150m unobstructed, as tested in laboratory conditions. Walls, additional wireless signals, microwaves etc all reduce this range and in most cases the range ca...
How do i change the frequency on my Door Chime? Article rated 2.2/5.0
If you have any generation the new MiP System of Lloytron Door Chimes then you do not need to worry about interference with other devices or other door chimes. These products use a very unique coded t...